What Does Fence Installation Cost in Hurst, TX in 2025?
If you're budgeting for a new fence in Hurst, you're likely wondering what a fair price looks like. Costs vary based on material, fence length, yard conditions, and the contractor you hire — but this guide gives you real local numbers to work from so you can evaluate quotes with confidence.
The short answer: most Hurst homeowners pay between $2,500 and $8,000 for a complete residential fence installation, with the average falling around $4,000–$5,500 for a typical backyard cedar privacy fence. For a full breakdown of your material options and decision factors, see our fence installation guide for Hurst, TX.
2025 Fence Cost by Material in Hurst
Cedar Wood Fence
Cedar is the go-to choice in Hurst and the broader HEB area. It strikes a balance between affordability and appearance that suits most established neighborhoods.
- Installed cost: $18–$28 per linear foot
- 200 linear feet (typical backyard): $3,600–$5,600
- Gates: $150–$400 per gate (walk gates); $400–$900 for double drive gates
Cedar costs have increased modestly since 2022 due to lumber pricing, but it remains the most cost-competitive privacy fence option in North Texas.
Vinyl Fence
Vinyl carries a higher upfront cost but a significantly lower lifetime maintenance cost. Popular for homeowners who want to install once and largely forget about it.
- Installed cost: $25–$40 per linear foot
- 200 linear feet: $5,000–$8,000
- Gates: $200–$500 per walk gate
Premium vinyl with thicker walls (typically triple-wall construction) is worth the upgrade in DFW given the temperature swings and UV exposure.
Wrought Iron Fence
Wrought iron is typically used for front yards, pool enclosures, or decorative accents rather than full backyard privacy fencing. Pricing reflects the labor-intensive nature of the material.
- Installed cost: $30–$50 per linear foot
- 200 linear feet: $6,000–$10,000
- Ornamental gates: $600–$2,000+ depending on design complexity
Chain Link Fence
Chain link is the most affordable option and suitable for large properties, dog enclosures, and utility areas.
- Installed cost: $10–$18 per linear foot
- 200 linear feet: $2,000–$3,600
Composite / Wood-Composite Fencing
A newer category that mimics the look of wood but with better weather resistance. Gaining traction in Hurst for homeowners who want the cedar aesthetic without the maintenance burden.
- Installed cost: $25–$45 per linear foot
- 200 linear feet: $5,000–$9,000
Full Cost Breakdown Table
| Material | Per Linear Foot | 150 ft Project | 200 ft Project | 300 ft Project |
|---|---|---|---|---|
| Chain Link | $10–$18 | $1,500–$2,700 | $2,000–$3,600 | $3,000–$5,400 |
| Cedar (6 ft privacy) | $18–$28 | $2,700–$4,200 | $3,600–$5,600 | $5,400–$8,400 |
| Composite | $25–$45 | $3,750–$6,750 | $5,000–$9,000 | $7,500–$13,500 |
| Vinyl (6 ft privacy) | $25–$40 | $3,750–$6,000 | $5,000–$8,000 | $7,500–$12,000 |
| Wrought Iron | $30–$50 | $4,500–$7,500 | $6,000–$10,000 | $9,000–$15,000 |
What Drives Fence Costs in Hurst Specifically?
Clay Soil and Post Work
Hurst sits on Tarrant County's expansive clay soil, which requires deeper, more substantial post footings to prevent leaning over time. Contractors who properly address clay soil will set posts 24–30 inches deep with full concrete footings — this adds labor and materials cost compared to sandy or loam soil markets, but it's essential for fence longevity.
Expect to pay a slight premium (roughly $1–$3 more per linear foot) compared to markets without challenging soil conditions.
Storm Damage and Old Fence Removal
Many Hurst fence projects involve removing an existing fence before installing the new one. Tear-out and disposal typically runs $3–$8 per linear foot, or $600–$1,600 for a 200-foot fence. If you're replacing a fence after storm or hail damage, check your homeowner's policy — removal costs are sometimes covered.
Yard Access and Terrain
If contractors can't get equipment into your yard easily (narrow gates, tight side yards, landscaping), labor costs increase. Sloped yards also add cost — expect 10–20% more for significantly uneven terrain.
Gates and Hardware
Every gate adds cost. For cedar privacy fences, budget:
- Walk gate: $150–$400
- Double drive gate: $400–$900
- Automatic gate opener: $800–$2,500+ installed
Hidden Costs to Watch For
When reviewing fence quotes in Hurst, watch for these line items that not all contractors include upfront:
- Permit fees: The City of Hurst charges permit fees based on project value. Typical range: $75–$200. Some contractors include this; others don't.
- Post caps and trim: Decorative post caps and trim boards add $2–$5 per linear foot but significantly improve appearance.
- Concrete upsell vs. standard: Confirm concrete footings are included, not an add-on.
- Staining or sealing: For cedar, factory-stained boards cost more but start protected. Otherwise, budget $1–$3 per linear foot for a professional sealing immediately post-install.
How to Get Accurate Quotes in Hurst
Getting three quotes is the standard recommendation, but here's how to make sure you're comparing apples to apples:
- Specify the same linear footage for each contractor
- Ask for post specs (diameter, depth, concrete volume)
- Confirm material grade (dog-eared vs. dog-eared premium cedar; vinyl wall thickness)
- Ask if permit pulling is included
- Get gate count and type in writing
Visit our fence installation service page for Hurst to request quotes from pre-vetted local contractors in the HEB area.
Typical Project Costs for Hurst Homes
To give you a realistic baseline, here are estimates for common scenarios in Hurst:
| Scenario | Estimated Cost |
|---|---|
| Small backyard (120 ft cedar, 1 walk gate) | $2,400–$3,700 |
| Standard backyard (200 ft cedar, 2 gates) | $4,000–$6,300 |
| Large backyard (300 ft cedar, 2 gates) | $5,800–$9,200 |
| Vinyl upgrade, standard backyard (200 ft) | $5,500–$8,500 |
| Front yard wrought iron accent (80 ft) | $2,600–$4,200 |
Frequently Asked Questions
How much does it cost to replace a storm-damaged fence in Hurst?
Partial replacements after storm damage typically cost $800–$2,500 depending on the number of sections damaged. Full replacements follow standard per-linear-foot pricing. If you have homeowner's insurance, hail and wind damage to fences is often covered — document everything before the contractor starts.
Are fence installation costs higher in Hurst than the rest of DFW?
Hurst pricing is broadly in line with DFW market averages, though the Mid-Cities area's clay soil and older housing stock mean removal and post work add slightly more to projects than in newer suburban markets. You won't see dramatic price differences compared to Arlington, North Richland Hills, or Bedford.
How long does a cedar fence last in Hurst's climate?
With proper installation and maintenance (staining every 2–3 years), a cedar fence in Hurst can last 15–20 years. Without maintenance, expect 8–12 years before significant deterioration. The North Texas heat and UV exposure are the primary degradation factors.
What's the cheapest way to fence a yard in Hurst?
Chain link at $10–$18 per linear foot is the most affordable option. If you want privacy, cedar is the most cost-effective privacy fence material. DIY installation can reduce costs but requires permitting and proper post work — skimping on concrete footings in Hurst's clay soil leads to premature failure.